NEWS

How to Replace Trailer Leaf Springs?

Replacing a trailer leaf spring is a relatively simple process that can be done with basic tools and some mechanical knowledge. Here are the steps to guide you through the process:

1. Safety First: Before starting any work, ensure the trailer is on a level surface and securely supported on jack stands. Wear protective gloves and eyewear.

2. Remove the Old Spring: Use a wrench to loosen the bolts securing the old leaf spring to the trailer’s frame and axle. Remove the bolts and carefully lower the old spring to the ground.

3. Inspect and Clean: Examine the trailer’s frame, axle, and mounting points for any signs of damage or wear. Clean the area thoroughly to remove any dirt or rust.

4. Measure and Order: Take accurate measurements of the old leaf spring, including its length, width, and number of leaves. Order a replacement spring that matches these specifications.

5. Install the New Spring: Position the new leaf spring onto the trailer’s frame and axle, aligning it with the mounting points. Insert the bolts and tighten them securely using a wrench.

6. Torque Check: Double-check that all bolts are tightened to the manufacturer’s specifications. Ensure the spring is evenly aligned and centered on the axle.

7. Test and Adjust: Lower the trailer off the jack stands and test its suspension by slowly driving over bumps or uneven terrain. Make any necessary adjustments to ensure proper alignment and smooth operation.

Remember, if you are unsure about any step or lack the necessary tools, it is always best to consult a professional mechanic or trailer specialist.

Related Post

2
How to choose trailer tyres?
1
A guide to selecting trailer torsion axles
Selecting the right trailer hitch ball involves more than just picking one off the shelf.
Why You Need a Trailer Hitch Ball for Safe Towing
Choosing the right trailer coupler is crucial for a seamless towing experience.
How to Choose the Perfect Trailer Coupler for Your Needs